RCR 80V Thrill/Cruise Firmware v2.5 Update

RCR 80V Thrill/Cruise Firmware v2.5 Update

The full Thrill/Cruise firmware v2.5 update has been completed and is currently being prepared for public release. The firmware, installation packages, and instructions are being prepared to ensure riders have everything needed for a smooth rollout.

RCR 80V - ONYX Motors Warehouse Cameos
Expected Release

The earliest planned release window is TBD - Updated September 2026

​

Please wait for the official release and installation instructions before attempting to update your bike. Customer Support will be following the official launch schedule and cannot provide the firmware early.

Early V2.0 Firmware on Some Dual Sport Shorty Models

A small batch of RCR 80V Dual Sport Shorty bikes shipped from the factory with an early version of the Thrill/Cruise firmware already installed.

This early version only includes throttle curve changes, and does not include the complete feature set planned for the final Thrill/Cruise firmware release.

If you have a dual sport shorty, you can only toggle between Thrill/Cruise modes by holding down the wrench button on the throttle assembly when in park.

Device Requirements

The initial release will use a sideloaded APK on Android.

Android

An Android phone or tablet will be required for the initial update process.

iPhone / iPad

The app is not currently available for iOS.

ONYX hopes to make the app available through both the Apple App Store and Google Play Store, but the approval process may take additional time.

If you only have an iPhone or iPad and do not want to wait, a basic Android device can be used to perform the update.

Can I Downgrade After Updating?

Downgrading to the previous firmware has not been tested or verified by ONYX.

While it may technically be possible, attempting to revert to an older firmware could cause the update to fail or potentially make the bike inoperable.

Recommendation: Once the Thrill/Cruise firmware is properly installed, do not plan on reverting to a previous version.

Before Updating

Once the firmware is officially released:

  • Follow the provided installation instructions exactly
  • Do not interrupt the update once it has started
  • Do not attempt to install unofficial or older firmware packages
  • Android is required for the update, you can often find cheap devices online 

Full installation instructions and required files will be provided with the official release.

Questions About the Release

For questions specifically regarding the Thrill/Cruise firmware rollout, Tim can be contacted through Facebook, Instagram, or:

Tim@onyxmotors.com

Please allow Customer Support to follow the official launch schedule rather than requesting early access to the firmware.


    • Related Articles

    • An Important Update on the 80V Model's Thermal Management System

      Hello Riders, We want to address the performance of the thermal management system on your 80V bike, particularly during aggressive riding. If you push the bike hard, you will experience the system engaging to regulate temperature. Please be assured ...

    • RCR 80V Fitment Guide

      This guide provides the key dimensions, rider fitment recommendations, and popular ergonomic upgrades for the ONYX RCR 80V. RCR 80V Dimensions Specification Shorty Standard Length 69" 69" Width 27" 27" Overall Height 38" 40" Handlebar Height 40" 42" ...

    • RCR Battery Best Practices Guide

      Following these battery best practices will help maximize performance, extend battery lifespan, and reduce the risk of long-term issues with your RCR battery. Battery Voltage & Remaining Range Reference For a more accurate idea of your actual ...

    • RCR Key Fob Cloning Guide

      This guide, written by fellow ONYX rider Dmitriy Sidorov, explains how to clone your original RCR key fob onto a compatible cloning remote. Thank you Dmitriy!! Follow the steps carefully and keep both remotes close together during programming. Before ...